Peanut Brittle (Easiest Microwave Recipe!) - Cooking Classy (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

Why is my peanut brittle too hard? Peanut brittle can end up too hard when the temperature gets too high during the cooking process. With a microwave peanut brittle recipe like this one, you may need to adjust the cooking times based on your microwave.

Once cooled and cracked, peanut brittle should be stored in an airtight container (it's okay to stack). Store in a cool dry place.

Water: Water helps the sugar completely dissolve. Salt: A pinch of salt enhances the other flavors. If you opt for salted butter, you can skip this ingredient. Peanuts: Of course, you'll need peanuts for this classic treat!

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature.

Microwave oven roasting: Pour peanuts into colander or wire basket and wet thoroughly. Sprinkle with salt. Pour into small microwave safe casserole or pie plate. Microwave for 2 1/2 minutes; stir, microwave 2 1/2 minutes longer.

How do you keep moisture out of peanut brittle? ›

#1 - Store in an airtight container

Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat. In terms of material for your containers, it is totally up to your preference.

Second, it's not what's in the brittle. It's what's missing — corn syrup. A common brittle ingredient, Asare said, corn syrup causes brittle to go all gooey, gummy and tooth-clingy as it melts in your mouth, whereas sugar crunches, crumbles and dissolves.

If your peanut brittle never sets up hard, it means you didn't cook it to a high enough temperature. Make sure you cook it to the “hard crack” stage, between 298°F- 313°F, and swirl your thermometer probe around in the syrup to get an accurate read of the temperature.

Peanut brittle has one redeeming quality: peanuts. Outside of that single ingredient, peanut brittle is painfully unhealthy. It contains: sugar, corn syrup, and butter, all of which are unhealthy for your body in different ways.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

Carefully pour the hot mixture onto the prepared pan and use a knife or spoon to quickly (and carefully!) spread the mixture into an even layer. Allow to cool completely (at least 30 minute) before breaking apart and eating. Store the completely cooled peanut brittle in an airtight container.

I started on medium heat, but turned it down to a bit below medium. KEEP STIRRING. While it's still semi solid you MUST keep stirring or it WILL burn. I thought it was never going to turn into a liquid, but of course it did.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

Dried peanuts may require boiling up to 24 hours until they soften. If your water is hard, full of minerals, or you are boiling at high altitude, then your boiling times for dried peanuts may be greater than 24 hours.